Your cart is empty
Sanlianhuan Original Parts

25A ESC Brushless Motor Speed Controller w/BEC

* One time charges may apply
Start from: Unit(s)

Share |

Please Choose:

* One time charges may apply

You're Bidding on RC Brushless Motor ESC 25A controller!!!

This Brand New Programable Outrunner Brushless motor ESC Speed Controller. It is very easy to setup and program. Most of the settings are auto-detected. Also, it is made with higher quality micro processor and more FETs with lower internal resistance. The best for airplane or helicopter.

High powered BEC (Battery Eliminator Circuitry) which handles 4 or 5 micro servos (take 9g servo for instance).

Features & Specifications
- Operating Current(A): 25A(35A surge)
- Input Operating Voltage: 7.4v ~ 14.8v (Compatible with NiCd, NiMH and LiPo batteries)
- BEC Max output: 2A/5V
- Dimention(LxWxH): 26*50*11.5mm
- Weight: 23g
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BrushLess Motor
- Programmable low voltage cutoff for Lipo and Nimh/Nicad Reverse and brakeand many more programmable options

Package Content
- Brand New Brushless Motor 25A ESC (Electronic Speed Control) x1
- FREE 24K gold-plated connectors & heat shrink tube x3 pairs

Hobbyhack ESC

- Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
- Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
- Programmable Items:
-- Brake Setting: brake enabled / brake disabled.
-- Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
-- Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
-- Start Mode: normal / soft / very soft.
-- Timing: low / medium / high.
-- Reset: reset all the programmable items to their default settings.
- Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

- When setting to the Quick response speed, the accelerate peak current will increase.
- To minimize possible radio interference induced by switching power system, BEC should be installed at least 5cm away from the receiver. The use of PCM receiver is recmmonded.

User Manual

  • Model: HH-ESC-25A
  • Shipping Weight: 0.1kg
  • 50 Units in Stock
  • Manufactured by: HobbyHack