Your cart is empty
Sanlianhuan Original Parts

ESky EK2-0704B Professional Head Lock Gyro

* One time charges may apply
US$18.00
Always Free Shipping
Start from: Unit(s)

Share |



Please Choose:



* One time charges may apply


EK2-0704B has been tested can be used on ESky Belt-CP and Honey Bee King 2 with EK2-0406A and EK2-0406G transmitter. However the transmitter remote gyro gain function will need to be disabled.

Firmly Head locking to provide stable and dynamic flight for your 4ch or 6ch helicopter!

Specification:

  • Input signal:1.5±0.5ms
  • Input power: 5~6VDC
  • Weight: 12.5g
  • Size: 27 x 28.5 x 18mm

    Feature Illumination:
  • can be used on Engine and Electric Helicopters
  • dual sensibility adjusting - nose locked model and standard model;
  • suitable for 4ch and 6ch transmitter;
  • with a built-in temperature equalizing electrocircuit;
  • to both 6CH and 4CH transmitters, the gain value can be adjusted through crust

    Installation:
  • the EK2-0704B headlock gyro must be installed horizontally (LED faces upward)
  • For ESky Belt-CP and Honey Bee King 2, please make sure it is at "NOR" position
  • the headlock gyro (3pins) cable should connect to the channel 4 on the receiver
  • the tail servo should connect to the headlock gyro (black wire near the edge)
  • Servo Limit on the gyro about 10%
  • Delay Switch on the gyro about 70-80%
  • you can choose not to connect the single orange cable to channel 5 on the receiver. if the gain of the headlock gyro > 50, it is in the headlocking mode. If gain < 50, it will be in the normal mode
  • please tie up all the cables before fly, this is to prevent loose cables to touch the main gear or motor
  • the photo shows only an example on how to mount the headlock gyro, you may choose to mount it on the main body of the helicopter.


  • Item Included:
  • Esky EK2-0704B : 1 Set

    • Model: EK2-0704B
    • Shipping Weight: 0.1kg
    • 96 Units in Stock
    • Manufactured by: Esky