This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.

This program card has 3 kinds of front panel to suitable for the following ESCs:

1) Product Number: LED_PC2A
- This is available for PLATINUM series aircraft/heli ESC;

2) Product Number:LED_PC2B
- This is available for SEAKING series boat ESC;

3) Product Number: LED_PC2C
- This is available for XERUN and EZRUN series (Version 2.0 ) car ESC;

The hardware and software of the above 3 models of program cards are identical, so you can print the different front panel when using the program card with different ESC.

Specification
1.1 Size: 88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight: 40g.
1.3 Input Voltage: 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)

 

Programmable Items
A) The programmable items of LED_PC2A(Available for PLATINUM series aircraft/heli ESC)
#1Brake Setting
#2Battery Type
#3Low Voltage Protection Mode (Cutoff Mode)
#4Low Voltage Protection Threshold (Cutoff Threshold)
#5Start Mode
#6Timing
#7Governor Mode
#8Motor Type
#9PWM Frequency
#10Built-In BEC Output
#11Motor Load
#12Lipo Cells

 

Front Panel Picture of LED_PC2A:

B)The programmable items of LED_PC2B(Available for SEAKING series boat ESC)

#1Running Mode
#2Lipo Cells
#3Low Voltage Cutoff Threshold
#4Timing

Front Panel Picture of LED_PC2B:

C)The programmable items of LED_PC2C(Available for XERUN and EZRUN series car ESC of Version2)
#1Running Mode
#2Drag Brake Force
#3Low Voltage Cut-Off Threshold
#4Start Mode
#5Maximum Brake Force
#6Maximum Reverse Force
#7Initial Brake Force
#8Throttle Neutral Range
#9Timing
#10Over-Heat Protection
#11Motor Rotation
#12Lipo Cells
(Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)

Front Panel Picture of LED_PC2C:

User Manual