Specification:

Weight: Only 8g 0.29oz

Size: 23.5x15.7x6.1mm

 

Cons-Current	Max Current	BEC	Input	TIMING	PWM
10A	15A	1A	2-3LIPO	N/A *	N/A *

10A ESC upgraded with new hardware

new features: Break on/off programmable feature

plug and flight.

 

Features:

Light weight

With 1A BEC

Lipo Battery Auto-detect

Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo

Break on/off

Auto shut down without signal

easy to use.

---

 

Manual:

Speed Controller Programming Instructions

For ESC with simple options

20A/30A/40

 

20A :  BEC :1.5A  2-3LIPO/5-10NIMH  MAX:30A /12S

30A :  BEC:3A   2-3LIPO/5-10NIMH   MAX:45A/12S

40A :  BEC:3A   2-3LIPO/5-10NIMH   MAX:60A/12S

 

 

Programming Instructions:

1.      Connect your motor and receiver to the speed controller, but do not connect the battery yet.

2. Turn on your transmitter and full up the throttle stick. Please Note: Most Futaba transmitters have the throttle channel reversed by default.

3. Connect your battery and you will hear a starting beep tone. After 3 seconds, the controller will start beeping a sequence as following. All beeps only repeat once.

4. To select, move the throttle stick in off position, between Beeps repeat. Then you will hear a confirmation sound.

5. Each time when you select an option, it will exit programming menu. You may restart program again.

Options Table (for Aircraft version Normal mode):