Specification

Cons-Current	Max Current	BEC	Input	Max RPM	TIMING	PWM
20A	25A	2A	4-10NIMH 2-3LIPO	20,000 (With A2212 motor )	N/A *	N/A *

 

Weight:25g

Size:32x24x7

 

Features:

Constant current 20A Max 25A  <10s

Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect

Break On/Off;

BEC: 2A

---

MAX RPM 20,000 with 2212 Motors

Auto Low battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell Lipo

 

Speed Controller Programming Instructions

For ESC with simple options

20A/30A/40

 

20A :  BEC :1.5A  2-3LIPO/5-10NIMH  MAX:30A /12S

30A :  BEC:3A   2-3LIPO/5-10NIMH   MAX:45A/12S

40A :  BEC:3A   2-3LIPO/5-10NIMH   MAX:60A/12S

 

 

Programming Instructions:

1.       Connect your motor and receiver to the speed controller, but do not connect the battery yet.

2. Turn on your transmitter and full up the throttle stick. Please Note: Most Futaba transmitters have the throttle channel reversed by default.

3. Connect your battery and you will hear a starting beep tone. After 3 seconds, the controller will start beeping a sequence as following. All beeps only repeat once.

4. To select, move the throttle stick in off position, between Beeps repeat. Then you will hear a confirmation sound.

5. Each time when you select an option, it will exit programming menu. You may restart program again.

Options Table (for Aircraft version Normal mode):